Products

RAIN PROTECTIVE SUITS made by “Mile Dragic Production” are certified for using in bad weather conditions, offering protection from rain, wind and cold. We produce comfortable and high quality rain suits using special materials.  Our suits are produced of multilayer fabric made by Sympatex®. Middle layer is a non-porous membrane that is laminated between the outer waterproof fabric and the internal lining.Sympatex® membrane is 100% waterproof, 100% windproof and highly breathable. The perspiration in the form of vapor is easily transported away from the inside towards the outside. All seams are sealed thus additionally securing the suits from water penetration.
The suits are made to be comfortable for wearing over standard military uniform. Currently we offer a Jacket with Hood, and Trousers.
The Rain suits are made in all standard sizes with a weight of approximately 1.2 kg.

In order to satisfy high demand for protection against different types of weapons for mass destruction, including chemical warfare agents, the Company “Mile Dragic Production” has produced the NBC SUIT  600200. Applying scientific innovations, technical experience and knowledge we have produced a suit that offers necessary protection against liquids, vapors, and aerosols carrying all types of chemical warfare agents, and still providing comfort to the user.

The NBC suit OFZ M 2000 is intended for multiple uses by personnel working under conditions of chemical warfare vapors and gases. In addition, it offers single use protection against chemical warfare drops, thermal impulse of nuclear exposure, or drops of napalm chemicals.

The suit consists of: Jacket with hood, trousers and transportation bag. Total weight is 3.0 kg.

The suit is made of a two-layered material, where the outer layer is a mixture of cotton and synthetic, treated to be hydrophobic and oil-repellent. The suit is made in all kinds of camouflage patterns providing high camouflage caracteristics in visual and IR part of the EM spectrum. The inner layer is made of a special filter material (Saratoga), the top quality fabric of this type in the world.

DE-MINING SUIT MD-06FB produced by the Company “MILE DRAGIC PRODUCTION” is intended for experts for explosive devices. Demining suit provides protection of the front side of the body against dangers that arise from possible detonations, such as all types of high velocity fragments (V₅₀>500m/s), high pressure and intense heat. The suit enables substantial mobility during field work.

Back side of the suit is made of mesh fabric for better air circulation. Cover of the suit is made of materials of various colors and can be made to provide protection in visible and near IR part of EM spectrum. There are pockets on the front side for placing the necessary equipment.
Total weight of complete DE-MINING SUITM-06FB is 11 kg. DE-MINING SUITM-06FB also consists:

• Helmet M-97A with visor
• Belt set
• Carrying bag

DE-MINING SUITM-06FB provides protection:
– Protective vest (front side), IIIA NIJ STD 0101.04 V₅₀>500 m/s as per STANAG 2920
– Genital protection (front side), IIIA NIJ STD 0101.04 V₅₀>500 m/s as per STANAG 2920
– Collar protection (front side), IIIA NIJ STD 0101.04 V₅₀>500 m/s as per STANAG 2920
– Protective hose (front side),  IIA NIJ STD 0101.04 V₅₀>400 m/s as per STANAG 2920
– Protective sleeves (front side),  IIA NIJ STD 0101.04 V₅₀>400 m/s as per STANAG 2920
The visor provides protection from bullets 9mmPARA (FMJ 8.0g, Vmax=441 m/s).
Protection level of DEMINING SUIT can be upgraded by inserting ballistic plate (front) of the following protection levels: level III or level IV per NIJ STD 0101.04.

DEMINING SUIT MD-06 is made to protect the user working in minefields or with explosive devices against dangers that arise from possible detonations, such as high velocity fragments, high pressure and intense heat.
DEMINING SUIT MD-06 consists of following parts:

• Protective hoses and sleeves
• Protective vest
• Belt with shoulder straps
• Helmet with visor M-97A
• Transportation bag

Total weight of demining suit for standard performance is 21 kg.

Various colors and design are available.
The front and back of the vest have pockets for inserting hard ballistic plates in order to  increase protection level up to level III or IV (NIJ STD 0101.04.)

There are four smaller pockets on the front of the vest for placing necessary equipment.
In addition, the DEMINING SUIT MD-06 can be equipped with cooling system.

Available sizes: L, XL,XXL

There are pockets on the front side for placing the necessary equipment. Total weight of completeDEMINING SUIT M-06FB is 11 kg.

DEMINING SUIT M-06FB provides following levels of protection:

• Protective vest (front side): IIIA per NIJ STD 0101.04; V₅₀>500 m/s per STANAG 2920
• Groin protector (front side): IIIA per NIJ STD 0101.04; V₅₀>500 m/s per STANAG 2920
• Collar protection (front side): IIIA per NIJ STD 0101.04; V₅₀>500 m/s per STANAG 2920
• Protective hose (front side): IIA per NIJ STD 0101.04; V₅₀>400 m/s per STANAG 2920
• Protective sleeves (front side): IIA per NIJ STD 0101.04; V₅₀>400 m/s per STANAG 2920

The visor provides protection from bullets 9mmPARA (FMJ 8.0g, Vmax=441 m/s).

The visor provides protection from bullets 9mmPARA (FMJ 8.0g, Vmax=441 m/s).
Protection level of DEMINING SUIT can be upgraded by inserting ballistic plate (front) of the following protection levels: level III or level IV per NIJ STD 0101.04.